Zhiyun-Tech Crane-2 3-Axis Stabilizer with Focus Motor

Key Features

  • For Mirrorless & DSLR Cameras up to 7 lb
  • 360° Pan, 320° Tilt, 360° Roll Motion
  • Focus Motor and Lens Gear Rings Included
  • Select Canon/Nikon Digital Focus Control

The Zhiyun-Tech Crane-2 is a 3-axis handheld gimbal stabilizer supporting mirrorless and DSLR cameras weighing up to 7 lb. Mount your camera on the included Manfrotto-standard quick release plate, balance it, and shoot for up to 18 hours on the supplied batteries. A rod-mount mechanical focus motor is included and can be controlled via the gimbal’s handwheel or an optional remote control for the Crane 2. It can be aligned to the focus or zoom ring of your lens for follow focus or zoom control. A support rod, USB cable, and two universal lens gear rings are also supplied for attaching and connecting the focus motor and using it with virtually all lenses.

The Crane-2 also allows for digital follow focus control via the gimbal handwheel for select Canon DSLRs and the Nikon D850 with compatible autofocus lenses. Simply connect the camera to the gimbal with the included USB cables, and after a few settings adjustments you’ll have direct follow focus control without requiring the external motor.

The Crane-2 features 360° pan, 320° tilt, and 360° roll adjustment. Multiple different special shooting modes allow you to get extra creative with the gimbal. Full-range POV mode enables 360° synchronous movement on all three axes. This means that the camera will lock into a single position and follow your movements without any limits, as opposed to evening out at some point. This allows for true POV capture.

Gimbal settings are quickly adjustable using the onboard control buttons and an OLED display. For safety, a “slow-fall” feature protects your camera from a sudden drop when the Crane-2 is powered down.

Features

  • Includes external rod-mount focus motor for mechanical follow focus/zoom control
  • 360° pan, 320° tilt, and 360° roll adjustment
  • 7 lb payload
  • 18-hour runtime using the included batteries
  • Digital follow focus control for select Canon cameras and the Nikon D850 with compatible autofocus lenses
  • Manfrotto-standard quick release plate
  • “Slow-fall” feature protects your camera from a sudden drop when the Crane-2 is powered down

Firmware Update v1.76 (June 2019)

  • Full-range POV: 360° synchronous movement on all three axes—instead of leveling off during motion, the camera will remain locked in position no matter which way or how far you move the gimbal, allowing for true POV shots
  • Vortex mode: Add dynamic movements to your barrel shot and open up possibilities
  • Direct control support for the Nikon Z6 and Z7 via the control panel—take photos, start/stop recording video, and control various other parameters
Number of Axes 3-Axis (Pitch, Roll, Yaw)
Rotation Range Yaw (Pan): 360°
Pitch (Tilt): 320° (-135 to 185°)
Roll: 360°
Follow Speed Pan: 120°/s
Tilt: 120°/s
Roll: 120°/s
Load Capacity 7 lb / 3.2 kg
Connectivity
Ports 1 x USB Micro-B
Wireless Frequency 2.4 GHz
Wireless Protocol Bluetooth 4.0
Battery
Battery Type 3 x 18650
Capacity (mAh) 2000 mAh
Capacity (Wh) 22.2 Wh
Battery Runtime 18 Hours
Battery Chemistry Lithium-Ion
Power
Operating Voltage 9.8 to 12.6 VDC
Operating Current 110 to 6000 mA
Environmental
Operating Temperature 14 to 113°F / -10 to 45°C
General
Mounting 1 x 1/4″-20 Female
1 x 3/8″-16 Female
Dimensions 8.27 x 4.65 x 17.72″ / 21 x 11.8 x 45 cm
Weight 2.76 lb / 1.25 kg