Key Features
- 1 x DLH1x150S 150W Soft Light
- Dimmable Power Supply
- 12 x 12″ Silver Mini Softbox
- 2 x DLHM4-300 Light Heads with Dimmer
Combining two different lights in the 230 VAC BPS3 3-Light Kit from Dedolight provides users with a versatile lighting setup. It includes the 150W DLH1x150 Soft Light Head with extremely even illumination along with a dimmable power supply and a 12 x 12″ silver mini softbox. At the other end of the spectrum from the soft light are the two DLHM4-300 tungsten heads with built-in transformer power supply and dimmer. The 150W light has a strong output and the ability to accept numerous accessories for even greater control. The kit also includes two sets of eight-leaf barndoors, diffusers, holders, a clamp, three 7′ light stands, a stand extension, lamp head pouch, and the DBP backpack to store all of it.
This Dedolight 150 Watt Softlight Head has an extra reflector, which boosts the output of the low voltage bulb (available separately). This is a light fixture only. A power cord, bulb and DT12-4 in-line power supply must be ordered separately.
This is a Dedolight Hi-Temp Pouch for storing a DLH1X150 fixture. Hi-Temp Pouches are made from Supersil — a space technology textile material which can withstand temperatures up to 2000°F (1100°C). Use the pouch to pack a hot soft light on the run, and to protect the soft light’s glass tube.
The Dedolight dimmable DT24-1 power supply provides up to 24 volts @ 150 watts.
The DT24-1 may be used with the DLH3 and DLH4 Aspheric 2 light heads, with 220-240 volt AC current.
The Dedlight Dedoflex Mini Softbox measures 12 x 12″ (30 x 30cm) and has a silver interior. It provides softness, with a little punch, when mounted to the front of a small Dedolight fixture.
The self-contained DLHM4-300E 150W Light Head from Dedolight works with a built-in electronic transformer dimmer designed for use on a 230 VAC power source. Using 12V lamps from 20 to 150 watts and powered directly from an AC power source, this version of the Dedolight head offers one color temperature of 3000K .
The DLHM4 light offers tremendous lamp economy and dependability, with a typical 100W lamp lasting over 1000 hours. The DLHM4 should not be operated upside down for extended periods.
Prevents stray light from exiting light head when no filter accessory is used.
This is the Dedolight 8-Leaf Barndoor Set with Gel Clips. Barndoors narrow the beam spread of a light fixture. They help create a 3-dimensional look to a lighting scheme by placing light in a specific area or by keeping it away.
The small leaves of this barndoor set have two helper leaves, which add more control of the light emitted from the fixture. Each large leaf has two clips for attachment of gel filters.
This is the Dedolight Dedoflex Reflector/Diffuser Holder. The lightweight, bendable arm is 12″ (30 cm) and accepts Dedoflex diffusers and reflectors via the 3 integrated spring-clips. It is mounted between the stand and the light head and weighs 180 g (6.3 oz).
The Dedolight 12″ (30.5 cm) Translucent Diffuser is meant to soften the light from an available source or from a Dedolight. While in a pinch it might provide slight, soft bounce light, its real worth is exhibited when used with the optional Dedoflex holder (DERH) which affixes directly to a Dedo head and positions the translucent disc in front of the light beam via a flexible arm.
The diffuser folds down to 1/3 its open size and stows in its provided case.
Attaches securely to stands, pipes, shelves, etc. up to 1-7/8 in (4.8 cm) diameter. A 5/8 in stud pivots and locks in two positions.
5.2 oz (147 g).
Made of elastic aircraft type aluminum, this holder tapes to flat surfaces, and attaches to table legs or pipes through the cutout in the plate. Mounting chains, gaffer tape, nails and screws are supplied. The base plate’s attached 2-way articulating arm is made of heavy-duty spring steel. 5 oz. (142g).
This black anodized aluminum, 7′ Dedolight Compact Light Stand weighs only 2.1 lb. Its maximum height is 7 feet, and it folds down to just 19″.
The Dedolight Flexible Light Stand Extension is for use with the Dedolight Stand (DST). It extends the maximum height of the stand to 8.6 ft (2.6 m). It bends and flexes in any position.
This 150-watt, 24-volt Non-Blackened Halogen Lamp from Dedolight is a spare or replacement lamp for heads that feature a GY6.35 2-pin sockets.
This 150W/24V Dedolight DL150 Lamp is used in various 150W Dedolight fixtures and has a lifetime of 300 hours at 24V run at 3200K.
Store and transport the classic Dedolights and the 200 Series / SUNDANCE fixtures in this DBP Backpack from Dedolight. An addition to their portable studio product line, the bag fits 4 DST Stands along with one of the following three equipment sets: 4 DLHM4-300 lights, 3 DLH4 lights and 3 in-line dimmable power supplies, or 2 DLH200D lights. It also accommodates 1 DLH1000SPLUS light, or 1 DLH200S light and 3 DEB200D electronic ballasts. Additionally, the pack has space for spare lamps and 1 soft box up to a 5′ Octodome.
To achieve the best possible balance, the stand compartment is in the middle of the bag and the light head compartments are on the side. Individually adjustable interior dividers enable customization. Two horizontal belts contribute to stability and security of the transported equipment, including the soft box. For comfortable carrying, the backpack features adjustable padded shoulder straps, an adjustable chest/sternum strap, and a padded waist belt, as well as top and side grip handles. It is crafted from durable ballistic nylon.
Compartment Dimensions (W x H x D) | 23.6 x 3.9 x 8.2″ / 60 x 10 x 21 cm 19.7 x 5.5 x 8.2″ / 50 x 14 x 21 cm 23.6 x 5.5 x 8.2″ / 60 x 14 x 21 cm |
Dividers | Yes |
Closure Type | Zipper, Strap |
Carry and Transport Options | Shoulder Strap Backpack Strap Waist Belt 2 x Handle |
Material of Construction | Nylon |
Exterior Dimensions (W x H x D) | 26 x 16.9 x 10.2″ / 66 x 43 x 26 cm |
Weight | 13.2 lb / 6 kg |