Key Features
-Omni-directional Mic
-Standard XLR Male Connector
-Runs on 48V Phantom or AA Batteries
-Includes Windscreen
he Sony ECM-77B is a miniature omni-directional lavalier microphone designed for professional broadcast, sound reinforcement and recording applications. The condenser element features a miniature profile allowing it to be easily concealed in performance and broadcast situations. The omni-directional pattern provides even frequency and sensitivity response at the direct and off-axis sections of the microphone capsule.
The ECM-77 provides a wide frequency response of 40Hz – 20kHz. The wide frequency response enables the microphone to accurately reproduce audio signal from a wide variety of sources. The ECM-77B is powered with an external 48 Volt phantom power source or AA alkaline battery. The ECM-77B is manufactured with a variety of connectors to accommodate various input devices, this version features a standard 3-pin XLR male connection.
Omni-directional Pattern
The omni-directional pattern provides even sensitivity and frequency response at the direct and off-axis sections of the microphone capsule.
Dual Power
The ECM-77B is powered with a single AA alkaline battery or external 48 volt phantom power source.
Miniature Profile
The miniature, unobtrusive profile enables the microphone to be easily concealed in broadcast and performance situations.
Standard XLR Connection
The ECM series is available in a variety of connections, this version features a standard 3-pin XLR male connection.
Transducer Electret Condenser
Polar Pattern Omnidirectional
Frequency Response 40 Hz – 20 kHz
Dynamic Range (Typical) > 90 dB
Signal-to-Noise Ratio 64 dB, (@ 1 kHz)
Maximum Input Sound Level 120 dB, (@ 1 kHz, 1% THD)
Power Requirements ‘AA’ Battery (1.5v DC), or Phantom Power 48v DC
Output Impedance 150 Ohms, (+/-20%, 1 kHz Balanced)
Output Connectors XLR-3M Type
Pad None
Low Frequency Roll-Off None
Applications Radio, Television and Broadcast.
Dimensions Microphone: .5 x .25″ (12.5 x 5.6mm) LxDiameter
Power supply: 5.25 x .82 (131.5 x 20mm) LxW
Cable: 10′ x .09″ (3m x 2.3mm) LxW
Weight Microphone: 0.053 oz. (1.5 g)
Power Supply: 4.2 oz. (120 g)