Key Features
- 150Wh Lithium-Ion Gold Mount Battery
- Supports up to 10A Continuous Draw
- 1000 Charge / Discharge Cycles
- Built-In Safety Sensors
The Core SWX HyperCore 150 Gold Mount Batteryis a 150Wh Lithium-Ion battery featuring high density cells designed to handle high power draws. Supporting more amperage per cell, the cells can withstand up to a 10A draw for extended periods without diminishing service life. Overall service life is rated at 1000 charge/discharge cycles. Runtime is projected at 6 hours at 25W. Safety sensors are built in that detect over/under voltage, over/under current, and above-normal temperature.
The HyperCore 150 is compatible with Anton/Bauer Lithium-Ion chargers. An Intellicom backlit LCD and a 4-LED gauge provide operating runtime in hours and minutes, remaining capacity as a bar grid and percentage, and remaining charge time. An on-board fuel computer samples capacity and charge or discharge load and re-computes and refreshes the LCD display every five seconds. A D-tap port and USB port are available on the side for powering accessories and charging various devices. The outer jacket is made of comfortable-to-hold, non-slip rubber. This battery pack will charge on all Core SWX chargers.
Mount / Series Type | Gold Mount |
Chemistry | Lithium-Ion |
Capacity (Wh) | 150 Wh |
Output Voltage | 14.8 VDC |
Maximum Load | 10 A |
Accessory Port | 1 x D-Tap 1 x USB Type-A |
Dimensions (W x H x D) | 3.8 x 5.9 x 2.4″ / 97 x 150 x 60 mm |
Weight | 2 lb / 0.9 kg |