Dedolight BPS3 3-Light Kit (230 VAC)

Key Features

  • 1 x DLH1x150S 150W Soft Light
  • Dimmable Power Supply
  • 12 x 12″ Silver Mini Softbox
  • 2 x DLHM4-300 Light Heads with Dimmer

Combining two different lights in the 230 VAC BPS3 3-Light Kit from Dedolight provides users with a versatile lighting setup. It includes the 150W DLH1x150 Soft Light Head with extremely even illumination along with a dimmable power supply and a 12 x 12″ silver mini softbox. At the other end of the spectrum from the soft light are the two DLHM4-300 tungsten heads with built-in transformer power supply and dimmer. The 150W light has a strong output and the ability to accept numerous accessories for even greater control. The kit also includes two sets of eight-leaf barndoors, diffusers, holders, a clamp, three 7′ light stands, a stand extension, lamp head pouch, and the DBP backpack to store all of it.

Dedolight DLH1X150 Soft Light Head – 150 Total Watts – Requires Power Supply

This Dedolight 150 Watt Softlight Head has an extra reflector, which boosts the output of the low voltage bulb (available separately). This is a light fixture only. A power cord, bulb and DT12-4 in-line power supply must be ordered separately.

Designed to work with its own 12×12″ softbox, and accepts small and medium sized Dedoflex domes, should a larger diffuser surface be desired.
When used with a 12 volt bulb, this fixture may be used with battery power.

Dedolight Hi-Temperature Storage Pouch for DLH1X150

This is a Dedolight Hi-Temp Pouch for storing a DLH1X150 fixture. Hi-Temp Pouches are made from Supersil — a space technology textile material which can withstand temperatures up to 2000°F (1100°C). Use the pouch to pack a hot soft light on the run, and to protect the soft light’s glass tube.

This pouch is large enough to store a DLH1X150 fixture,
which measures 4.9 x 3.2 x 3.7″ (12.4 x 8.2 x 9.3 cm).

Dedolight DT241E Power Supply with In-Line Dimmer (220-240VAC)

The Dedolight dimmable DT24-1 power supply provides up to 24 volts @ 150 watts.

The DT24-1 may be used with the DLH3 and DLH4 Aspheric 2 light heads, with 220-240 volt AC current.

Provides dimming from 100 – 0% of full power.
Variable function switch for 3200° or 3400° Kelvin operation

Dedolight Dedoflex Mini Softbox (Silver, 12 x 12″)

The Dedlight Dedoflex Mini Softbox measures 12 x 12″ (30 x 30cm) and has a silver interior. It provides softness, with a little punch, when mounted to the front of a small Dedolight fixture.

Dedolight DLHM4-300E 150W Light Head (230 VAC)

The self-contained DLHM4-300E 150W Light Head from Dedolight works with a built-in electronic transformer dimmer designed for use on a 230 VAC power source. Using 12V lamps from 20 to 150 watts and powered directly from an AC power source, this version of the Dedolight head offers one color temperature of 3000K .

The DLHM4 light offers tremendous lamp economy and dependability, with a typical 100W lamp lasting over 1000 hours. The DLHM4 should not be operated upside down for extended periods.

The new “4” series has dramatically improved light output over the DLH3 series.
20:1 flood to spot ratio, providing a 4.5-40° beam spread.
Updated design of lenses and reflectors.

Dedolight Dedo Light Shield Ring

Prevents stray light from exiting light head when no filter accessory is used.

Dedolight 8-Leaf Barndoor Set with Gel Clips (5.5″)

This is the Dedolight 8-Leaf Barndoor Set with Gel Clips. Barndoors narrow the beam spread of a light fixture. They help create a 3-dimensional look to a lighting scheme by placing light in a specific area or by keeping it away.

The small leaves of this barndoor set have two helper leaves, which add more control of the light emitted from the fixture. Each large leaf has two clips for attachment of gel filters.

Dedolight Dedoflex Reflector and Diffuser Holder

This is the Dedolight Dedoflex Reflector/Diffuser Holder. The lightweight, bendable arm is 12″ (30 cm) and accepts Dedoflex diffusers and reflectors via the 3 integrated spring-clips. It is mounted between the stand and the light head and weighs 180 g (6.3 oz).

Dedolight 12″ Translucent Diffuser

The Dedolight 12″ (30.5 cm) Translucent Diffuser is meant to soften the light from an available source or from a Dedolight. While in a pinch it might provide slight, soft bounce light, its real worth is exhibited when used with the optional Dedoflex holder (DERH) which affixes directly to a Dedo head and positions the translucent disc in front of the light beam via a flexible arm.

The diffuser folds down to 1/3 its open size and stows in its provided case.

Dedolight Light Clamp

Attaches securely to stands, pipes, shelves, etc. up to 1-7/8 in (4.8 cm) diameter. A 5/8 in stud pivots and locks in two positions.
5.2 oz (147 g).

Dedolight Lamphead Mounting Plate with 5/8″ Stud and Arm

Made of elastic aircraft type aluminum, this holder tapes to flat surfaces, and attaches to table legs or pipes through the cutout in the plate. Mounting chains, gaffer tape, nails and screws are supplied. The base plate’s attached 2-way articulating arm is made of heavy-duty spring steel. 5 oz. (142g).

Dedolight Compact Light Stand (7′)

This black anodized aluminum, 7′ Dedolight Compact Light Stand weighs only 2.1 lb. Its maximum height is 7 feet, and it folds down to just 19″.

Dedolight Flexible Light Stand Extension – Fits 5/8″ Stud

The Dedolight Flexible Light Stand Extension is for use with the Dedolight Stand (DST). It extends the maximum height of the stand to 8.6 ft (2.6 m). It bends and flexes in any position.

Dedolight Non-Blackened Halogen Lamp (150W/24V)

This 150-watt, 24-volt Non-Blackened Halogen Lamp from Dedolight is a spare or replacement lamp for heads that feature a GY6.35 2-pin sockets.

Dedolight DL150 Lamp (150W/24V)

This 150W/24V Dedolight DL150 Lamp is used in various 150W Dedolight fixtures and has a lifetime of 300 hours at 24V run at 3200K.

Dedolight DBP Backpack for Lighting Gear

Store and transport the classic Dedolights and the 200 Series / SUNDANCE fixtures in this DBP Backpack from Dedolight. An addition to their portable studio product line, the bag fits 4 DST Stands along with one of the following three equipment sets: 4 DLHM4-300 lights, 3 DLH4 lights and 3 in-line dimmable power supplies, or 2 DLH200D lights. It also accommodates 1 DLH1000SPLUS light, or 1 DLH200S light and 3 DEB200D electronic ballasts. Additionally, the pack has space for spare lamps and 1 soft box up to a 5′ Octodome.

To achieve the best possible balance, the stand compartment is in the middle of the bag and the light head compartments are on the side. Individually adjustable interior dividers enable customization. Two horizontal belts contribute to stability and security of the transported equipment, including the soft box. For comfortable carrying, the backpack features adjustable padded shoulder straps, an adjustable chest/sternum strap, and a padded waist belt, as well as top and side grip handles. It is crafted from durable ballistic nylon.

Store and transport the classic Dedolights and the 200 Series / SUNDANCE fixtures.
Fits 4 DST Stands along with 4 DLHM4-300 lights, 3 DLH4 lights and 3 in-line dimmable power supplies, or 2 DLH200D lights.
Also accommodates 1 DLH1000SPLUS light, or 1 DLH200S light and 3 DEB200D electronic ballasts.
Space for spare lamps, small accessories, and 1 soft box up to a 5′ Octodome.
To achieve the best possible balance, the stand compartment is in the middle of the bag and the light head compartments are on the side.
Individually adjustable interior dividers enable customization.
Horizontal belts contribute to stability and security of the transported equipment, including the soft box.
Adjustable padded shoulder straps.
Adjustable chest/sternum strap.
Padded waist belt.
Top and side grip handles.
Made of durable ballistic nylon to survive the rigors of daily work on film/TV sets.
Compartment Dimensions (W x H x D) 23.6 x 3.9 x 8.2″ / 60 x 10 x 21 cm
19.7 x 5.5 x 8.2″ / 50 x 14 x 21 cm
23.6 x 5.5 x 8.2″ / 60 x 14 x 21 cm
Dividers Yes
Exterior
Closure Type Zipper, Strap
Carry and Transport Options Shoulder Strap
Backpack Strap
Waist Belt
2 x Handle
Material of Construction Nylon
Exterior Dimensions (W x H x D) 26 x 16.9 x 10.2″ / 66 x 43 x 26 cm
Weight 13.2 lb / 6 kg